Vented Fills for 1-1/2" Hose w/ Color Coded Resin Inserts (Straight)

Note: This is a Perko® Legacy product.

We no longer have any availability for this product.

Product Description

Perko Legacy Product

Chrome Plated Bronze Scalloped Cap
Color Coded Resin Decal
Straight Neck
Black Polymer Body
Polymer Tether
Integral Tank Vent with Flame Arrestor and Anti Surge Valve
*Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring.
For Matching Waste Plate See Fig. 0569

Technical Information

For Hose Size: 1-1/2"
For Vent Hose: 5/8"
O.D. Flange: 3-3/8"
Neck Length: 2-7/16"
Mounting Hole Diameter: 2-1/8"
Screw Size: #8

Mounting Ring for Vented Fills

The use of these heightening rings is required in any application where water might be splashed around a vented fill. The ring raises the opening between the fuel cap and fill an additional 3/8" above the deck surface, thereby reducing the likelihood that splashed water will enter the fuel system through the breathing vent. The split version of the ring is designed for aftermarket use on existing installations. In most cases, it allows the ring to be added without disconnecting fuel and vent hoses from the fill. For new OEM installations, rings are supplied without the split since they can be installed before hoses are connected to the fill.

NOTE: The ring will not prevent water from entering the system if the cap becomes submerged or substantially flooded. If this situation exists, the fill/vent must be moved to a dry location or replaced with a sealed cap and a separate vent located elsewhere.

Retail Pkg.	OEM Bulk Pkg.
0540DPRBLK	0540RNGBLK

Ordering Information

Marked For:	Cap Type	Dealer Pkg.** 5 Cards 1 Pc. per Card	OEM Bulk Pkg. 25 Pcs.	Ship Wt. Carton Lbs. DP/OEM Bulk
Gas	Chrome	0583DP0CHR*	0583G00CHR*	4.5/17.2
Diesel	Chrome	0583DP0CHR	0583D00CHR*	4.5/17.2
Water	Chrome	0583DP0CHR	0583W00CHR	4.5/17.2

Instructions & Resources

0583 Installation Instructions

View 0583 in our Print Catalog

Product Notes

* NOTE: These Fills Meet the Requirements of U.S.C.G. Safety Standards, January 31, 1977, for Gasoline Fuel Systems, 33 CFR 183. Fills shown on this page DO NOT meet the requirements for 40 CFR 1060 sub part B Emissions Standards and Related Requirements.

** NOTE: DP Package includes fill, cap and three inserts (Gas, Diesel and Water). Use Gas insert on fill only with Non-EPA Complaint fuel systems.

Consider the use of the Mounting Ring (Fig. 0540DPRBLK) for all installations (Included in Dealer Pkg.)