OEM Bulk Packaged Fuel & Water Fills for 1-1/2" Hose with Color Coded Metallic Inserts

Note: This is a Perko® Legacy product.

We no longer have any availability for this product.

Product Description

Perko Legacy Product

Straight Neck, Non-Vented Gas, Diesel or Water Fill
Chrome Plated Bronze Scalloped Cap
Color Coded Metallic Inserts
Black Polymer Body
Ground Wire Not Required
Deck Plate Key Not Required
For Matching Waste Plate See Fig. 0568

Technical Information

Fill Hose Size: 1-1/2"
Vent Hose Size: 5/8"
Neck Length: 3-1/8"
O.D. Flange: 3-3/8"
Mounting Hole Diameter: 2-1/8"
Screw Size: #8

Mounting Ring for Vented Fills

The use of these heightening rings is required in any application where water might be splashed around a vented fill. The ring raises the opening between the fuel cap and fill an additional 3/8" above the deck surface, thereby reducing the likelihood that splashed water will enter the fuel system through the breathing vent. The split version of the ring is designed for aftermarket use on existing installations. In most cases, it allows the ring to be added without disconnecting fuel and vent hoses from the fill. For new OEM installations, rings are supplied without the split since they can be installed before hoses are connected to the fill.

NOTE: The ring will not prevent water from entering the system if the cap becomes submerged or substantially flooded. If this situation exists, the fill/vent must be moved to a dry location or replaced with a sealed cap and a separate vent located elsewhere.

Retail Pkg.	OEM Bulk Pkg.
0540DPRBLK	0540RNGBLK

Ordering Information

Marked For:	Cap Type	OEM Bulk Pkg. 25 Pcs.	Ship Wt. Carton Lbs. OEM Bulk
Gas	Chrome	0551G00CHR*	20.5
Diesel	Chrome	0551D00CHR	20.5
Water	Chrome	0551W00CHR	20.5

Instructions & Resources

View 0551 in our Print Catalog

Product Notes

*NOTE: These Fills Meet the Requirements of U.S.C.G. Safety Standards, January 31, 1977, for Gasoline Fuel Systems, 33 CFR 183. Fills shown on this page DO NOT meet the requirements for 40 CFR 1060 sub part B Emissions Standards and Related Requirements.